Blog, Conseils pour l'entretien des poupées sexuelles Soul, Comprendre les poupées sexuelles

Guide complet pour réparer une poupée sexuelle en 2025

Publié par

Sur 26 mars 2025

Prendre soin de votre poupée sexuelle is essential if you want it to last for years. Over time, issues like tears, pressure marks, or discoloration can appear. These problems often happen because of sharp objects, excessive pressure, or even heat exposure. Awkward poses or overstretching the material can also lead to damage. The good news? You can repair a sex doll with the right tools and techniques. Whether it’s a TPE or silicone doll, the process is simpler than you might think. With a little effort, you can restore your doll to its original condition and keep it looking great.

Principaux enseignements

Check your doll often for damage like rips or fading. Finding problems early saves time and money on fixing them.
Be gentle with your doll to avoid harm. Keep it away from sharp things and don’t bend it too much to stop rips or marks.
Use the correct tools to fix your doll. TPE dolls need special glue and heat, while silicone dolls need silicone glue to repair them well.
Store your doll in the right way to keep it nice. Put it in a cool, dry spot and out of sunlight to stop fading or bending.
Wash your doll often with mild soap and water. This keeps it clean and stops germs, helping it last longer.
Get expert help for big problems. Hard fixes like broken parts or deep rips might need a professional to fix them properly.
Dress your doll in safe clothes to stop stains. Light-colored clothes work best to avoid marks.
Clean your doll based on how much you use it. Regular care keeps it looking good and makes it last as a great companion.

Identifying Common Issues

Tears and Abrasions

Tears and abrasions are among the most common issues you might face with your sex doll. These problems often occur due to accidents or improper handling. For example, small cuts and tears can happen if the doll comes into contact with sharp objects. Abrasions may appear when the doll is dragged across rough surfaces or stored improperly.

Here are some typical causes of these damages:

Improper installation of doll parts can lead to tears or even limb detachment.
Low-quality materials are more prone to tearing.
Accidents like drops or collisions can result in significant disfigurement.

To fix the tears and abrasions, you’ll need to identify the severity of the damage first. Minor damages, like small cuts and tears, can often be repaired at home using the right tools and adhesives. However, for larger tears, you might need advanced techniques or professional help.

Conseil : Always handle your doll with care and avoid exposing it to sharp or abrasive surfaces to prevent these issues.

Pressure Marks and Indentations

Pressure marks on your sex doll can develop over time, especially if it’s stored or posed incorrectly. These marks and indentations can ruin the doll’s appearance and even affect its material integrity.

To prevent these issues, follow these steps:

Proper Posing and Handling: Avoid extreme poses and ensure the doll’s weight is evenly supported when moving it.
Ideal Storage Techniques: Store the doll lying flat on its back or hang it using soft straps to avoid pressure points.
Temperature Considerations: Keep the doll in a moderate temperature to maintain its skin elasticity.
Regular Cleaning and Maintenance: Clean and care for the doll regularly to preserve its condition.

If you notice pressure marks, don’t panic. You can often restore the material by applying gentle heat or massaging the area. This helps the material regain its original shape and smoothness.

Joint or Skeleton Damage

Joint or skeleton damage is a more serious issue that can affect your doll’s posture and stability. You might notice loose joints or changes in the doll’s ability to hold poses. These problems usually stem from broken welds, loose screws, or foundational cracks in the frame.

Here are some common types of joint or skeleton damage:

Structural damage to the core frame, which compromises the doll’s integrity.
Loose joints caused by broken welds or screws, leading to instability in the limbs.
Hidden cracks or other structural issues that worsen over time if left unaddressed.

If you suspect joint or skeleton damage, inspect the doll carefully. Identifying the root cause will help you determine whether you can fix it yourself or need professional assistance.

Remarque : Regular inspections can help you catch these issues early, saving you time and money on repairs.

Discoloration or Stains

Discoloration and stains can be frustrating, but they’re a common issue with sex dolls. These blemishes often happen when the doll comes into contact with dark or brightly colored fabrics. The dyes in these materials can transfer onto the doll’s skin, especially if the fabric stays in contact for a long time. Other causes include exposure to certain oils, makeup, or improper cleaning products.

To prevent stains, you should:

Avoid dark or dyed clothing: Stick to light-colored or white fabrics when dressing your doll.
Wash new clothes first: This removes excess dye that could transfer.
Use safe cleaning products: Stick to mild, non-abrasive cleaners designed for TPE or silicone.

If your doll already has stains, don’t worry. You can often remove them with the right approach. For TPE dolls, try using a stain remover specifically made for TPE material. Apply it to the affected area and let it sit for a few hours before wiping it off. Silicone dolls are less prone to staining, but if it happens, you can use a gentle cleanser or a baking soda paste to lift the discoloration.

Conseil : Always test any cleaning product on a small, hidden area of the doll first. This ensures it won’t cause further damage.

Understanding the causes tpe sex doll skin stains can help you avoid them in the future. Proper care and attention go a long way in keeping your doll looking flawless.

Outils et matériel nécessaires

When it comes to repairing your sex doll, having the right tools and materials is crucial. Whether you’re dealing with a TPE or silicone doll, using the proper equipment ensures a smoother repair process and better results. Let’s break down what you’ll need for each type of material and some general tools that work for both.

For TPE Repairs

TPE sex doll repair Solvent and Adhesives

TPE repair solvent is your go-to tool for fixing tears and cracks in TPE dolls. It works by melting the surface slightly, allowing the material to bond seamlessly. You’ll also need TPE glue for smaller fixes or when precision is key. Keep a cotton swab handy to apply the solvent or glue without making a mess.

Conseil : Always clean the damaged area with isopropyl alcohol before applying the solvent. This removes dirt and ensures a strong bond.

Heat Gun or Soldering Iron

A heat gun is perfect for smoothing out abrasions or restoring pressure marks. It gently warms the TPE, making it pliable enough to reshape. For smaller areas, a soldering iron can provide more precision. Just be cautious—TPE is sensitive to high temperatures, so work slowly to avoid further damage.

Sandpaper and Polishing Tools

Fine-grit sandpaper is essential for smoothing rough patches after repairs. Pair it with polishing tools to restore the doll’s surface to its original texture. Always use gentle, circular motions to avoid over-sanding.

For Silicone Repairs

Silicone Adhesives (e.g., Sil-Poxy, Permatex)

Silicone glue, like Sil-Poxy or Permatex, is a must-have for silicone sex doll repair. It’s designed to bond silicone surfaces securely, making it ideal for sealing tears or cracks. Apply it with a toothpick or spatula for precision, and let it cure completely before handling the doll again.

Mixing Tools and Applicators

For larger repairs, you might need to mix silicone adhesives with pigments to match the doll’s skin tone. Use small mixing tools and applicators to ensure an even application. A clean, flat surface for mixing is also helpful.

Color Matching Pigments

Color matching pigments are great for blending repairs into the doll’s original color. These pigments can be mixed directly into the silicone adhesive before application. Test the color on a hidden area first to ensure a perfect match.

General Tools for Both Types

Cleaning Supplies (e.g., isopropyl alcohol, microfiber cloths)

Cleaning is a critical step in any repair. Use isopropyl alcohol and a clean microfiber cloth to remove dirt, oils, and old adhesive from the damaged area. This ensures the new adhesive bonds properly.

Gloves and Safety Gear

Always wear gloves to keep your hands clean and avoid contaminating the repair area. Safety gear, like goggles, can protect you from accidental splashes of adhesive or solvent. Working in a well-ventilated area is also a good idea to avoid inhaling fumes.

Remarque : A clean workspace is just as important as the tools themselves. Dust or debris can interfere with the repair process, so make sure your area is spotless before you begin.

By gathering these tools for sex doll repair, you’ll be well-prepared to handle most issues. Whether you’re using a tpe repair solvent or silicone glue, having the right materials makes all the difference.

Step-by-Step Repair Instructions

Repair your TPE Sex Dolls

Fix TPE Tears with Solvent or Heat and repair your tpe sex doll

Fixing tears in your TPE doll might seem intimidating, but it’s actually straightforward. Follow these steps to repair your TPE sex doll:

Clean the damaged area with isopropyl alcohol to remove oils and dust.
Open the tear gently with your fingers. Apply a thin layer of TPE repair solvent to the inner surface using a cotton swab.
Align the edges of the tear and hold them together for several minutes. This allows the solvent to melt and bond the material.
Let the area cure for 24 hours. During this time, keep the doll in a position that doesn’t strain the repaired spot.

For smaller tears, you can also use TPE glue. Apply it carefully, ensuring the tear is fully covered, and let it dry for at least 30 minutes.

Conseil : Always test the solvent or glue on a hidden area first to ensure compatibility with your doll’s material.

Smoothing Abrasions Using Polishing Tools

Abrasions can make your doll’s surface feel rough, but you can smooth them out easily. Start by cleaning the area with baby oil or Vaseline. This helps distribute heat evenly and prevents burning. Use a heat gun about four inches away from the surface, heating the TPE until it becomes slightly glossy. Quickly wipe the area with a cloth to smooth out the abrasions. Repeat the process if needed, and finish by applying powder for a soft, natural feel.

Alternatively, fine-grit sandpaper can help with minor abrasions. Gently sand the area in circular motions, then polish it with cornstarch or aluminum powder for a flawless finish.

Restoring Pressure Marks with Heat Application

Pressure marks on your doll can be frustrating, but they’re fixable. Apply a small amount of baby oil to the affected area. Use a heat gun to warm the TPE gently, keeping it at a safe distance. Massage the area while it’s warm to help the material regain its original shape. Repeat as necessary until the pressure marks disappear.

Remarque : Avoid overheating the TPE, as this can cause further damage.

Silicone Sex Doll Repair

Sealing Tears and Cracks with Silicone Adhesive

To repair a silicone sex doll, use a high-quality silicone adhesive like Sil-Poxy. Clean the tear with isopropyl alcohol, then apply the adhesive to the edges. Align the edges carefully and press them together. Allow the adhesive to cure completely for a strong, seamless bond.

Conseil : For larger tears, consider consulting a professional to ensure the repair is done correctly.

Addressing Surface Damage with Color Matching

Surface damage on silicone dolls can be tricky, but color-matching pigments make it easier. Mix the pigment with silicone adhesive to match your doll’s skin tone. Apply the mixture to the damaged area using a fine applicator. Let it cure fully before handling the doll again.

Recoloring and Blending for a Seamless Finish

After sealing tears or fixing surface damage, you might notice slight discoloration. Use color-matching pigments to blend the repaired area with the surrounding skin. Apply the pigment in thin layers, building up the color gradually for a natural look.

General Repairs

Reattaching Loose Parts (e.g., eyelashes, nails)

Loose eyelashes or nails can affect your doll’s appearance, but they’re easy to fix. Use a small amount of safe adhesive to reattach them. For eyelashes, apply the glue with a toothpick and press the lash into place. For nails, clean the nail bed first, then glue the nail on securely.

Cleaning and Polishing for Final Touches

Cleaning your doll regularly keeps it looking its best. Use a soft sponge with warm water and antibacterial soap to wash the body. Avoid submerging the head or neck. Pat the doll dry with a non-abrasive cloth, then apply baby powder to prevent stickiness. For wigs, use sulfate-free shampoo and a wide-tooth comb to maintain their quality.

Remarque : Always clean your doll after each use to maintain hygiene and extend its lifespan.

Advanced Repair Techniques for Severe Damage

Replacing Damaged Joints or Skeleton Parts

When your doll’s joints or skeleton parts break, it can feel like a major setback. But don’t worry—you can fix this with the right approach. Start by identifying the damaged area. Is it a loose joint, a broken weld, or a cracked frame? Once you know the issue, you can decide whether to repair it yourself or seek professional help.

For DIY repairs, you’ll need tools like a screwdriver, replacement parts, and possibly a welding kit if the skeleton is metal. Follow these steps:

Disassemble the Doll: Carefully remove the outer material around the damaged area. Use a sharp blade or scissors, but be cautious not to cut too deep.
Fix or Replace the Joint: If it’s a loose screw, tighten it. For broken welds, use a welding kit to reattach the metal. If the part is beyond repair, replace it with a new one.
Reassemble the Doll: Once the skeleton is fixed, sew or glue the outer material back in place. For TPE or silicone, use the appropriate adhesive to seal the area.

Conseil : If the damage seems too complex, consider consulting a professional. They have the expertise to handle advanced sex doll repair tasks like skeleton replacements.

Repairing Deep Tears or Holes in TPE or Silicone

Deep tears or holes might look intimidating, but you can fix them with patience and the right materials. For TPE dolls, avoid using regular glue—it can worsen the damage. Instead, follow these steps:

Clean the Area: Use isopropyl alcohol to remove dirt and oils.
Apply TPE Glue: Cover the tear completely and align the edges. Hold them together for at least 30 minutes to ensure a strong bond.
Cure the Repair: Let the glue cure for 24 hours before handling the doll.

For silicone dolls, the process is slightly different:

Clean the Damaged Area: Use isopropyl alcohol to ensure it’s free from contaminants.
Mix Glue and Pigment: Combine silicone glue with a matching pigment to blend the repair seamlessly.
Apply the Mixture: Fill the tear with the mixture and smooth it out.
Curing Time: Allow it to cure for 6-8 hours as per the glue’s instructions.

Remarque : For a more permanent solution with TPE, you can use a heat gun and TPE chunks to fill the hole. However, this method requires precision to avoid further damage.

Restoring Heavily Discolored Areas

Discoloration can make your doll look worn out, but you can restore its original appearance with a few simple steps. First, clean the stained area as soon as possible. Use a mild soap and water solution or a specialized TPE cleaner. Avoid harsh chemicals—they can damage the material.

For stubborn stains, try a stain remover designed for sex dolls. Here’s how:

Wear gloves to protect your hands.
Apply the stain remover evenly to the stained area using a cotton swab or your gloved fingers. For deep stains, use a thicker layer.
Let it sit for up to 24 hours, but no longer than 48 hours to avoid lightening the skin tone.
Wipe the area clean after the stain is removed.

Conseil : Treat stains immediately. If they penetrate too deeply, they may become permanent.

By addressing severe damage promptly, you can extend your doll’s lifespan and keep it looking as good as new.

Professional Repair Services vs. DIY Repairs

When it comes to repairing your sex doll, you’ve got two main options: doing it yourself or hiring a professional. Each approach has its own perks and drawbacks, so let’s break it down to help you decide what works best for you.

Why Choose Professional Repair Services?

Professional repair services can be a lifesaver, especially if the damage is severe or beyond your skill level. Here’s why you might want to go this route:

Time-Saving: Professionals work quickly and efficiently. They can diagnose and fix issues faster than you might on your own.
Specialized Tools: Repair shops have access to advanced tools that ensure precise repairs. These tools aren’t always available to DIYers.
Expertise: Technicians bring years of experience to the table. They know how to handle complex problems without making things worse.
Warranty Protection: Many repair services offer warranties. If something goes wrong after the repair, they’ll fix it at no extra cost.
Complex Repairs: For intricate issues like skeleton damage or deep tears, professionals are your best bet.

However, there are a few downsides to consider:

Cost: Professional repairs can be pricey, especially if the damage is extensive.
Scheduling Hassles: You might need to wait for an appointment, which can be inconvenient.
Privacy Concerns: Handing over your doll to a repair shop might feel uncomfortable for some people.
Less Control: You don’t always get a say in the materials or methods used for the repair.

Why Go the DIY Route?

If you’re handy and enjoy tackling projects yourself, DIY repairs can be a rewarding option. Here’s what makes it appealing:

Cost-Effective: You’ll save money by avoiding labor fees. Most tools and materials are affordable and reusable.
Control Over Repairs: You decide how to fix the issue and which materials to use. This can be especially important for maintaining your doll’s original look and feel.
Commodité : You can work on your own schedule without waiting for appointments.

That said, DIY repairs aren’t without challenges:

Learning Curve: If you’re new to doll repairs, there’s a lot to learn. Mistakes can lead to more damage.
Limited Tools: You might not have access to the specialized equipment that professionals use.
Le temps est compté : Repairs can take longer if you’re figuring things out as you go.

Which Option is Right for You?

The choice between professional services and DIY repairs depends on your situation. If the damage is minor and you’re confident in your skills, DIY might be the way to go. But for complex issues or if you’re short on time, a professional can provide peace of mind and high-quality results.

Conseil : Always weigh the cost, time, and complexity of the repair before deciding. Sometimes, a mix of both approaches works best—handle the simple fixes yourself and leave the tough ones to the experts.

By understanding the pros and cons of each option, you can make an informed decision that suits your needs and keeps your doll in top shape.

Preventive Measures and Maintenance Tips

Taking care of your sex doll doesn’t have to be complicated. With a few simple habits, you can keep your doll in great condition for years. Let’s dive into some essential cleaning, storage, and maintenance tips.

Proper Cleaning and Storage Practices

Cleaning your doll regularly is one of the best ways to maintain its appearance and durability. For TPE dolls, aim to clean them 3-4 times a month when not in use. Silicone dolls require less frequent cleaning—about once a month is enough. When cleaning, follow these steps:

Use a soft cloth and mild shower gel to gently clean the surface.
Rinse the doll’s vents thoroughly to prevent mold from forming.
Pat the doll dry with a microfiber cloth, then let it air dry for a few hours.
Apply a restoring powder to keep the skin smooth and prevent stickiness.

Proper storage is just as important as cleaning. Always store your doll in a cool, dry place away from direct sunlight. For short-term storage, lay the doll on a foam pad to avoid deformation. For long-term storage, hanging the doll with a compatible hanger is ideal. This prevents joint stiffness and keeps the doll in good shape.

Conseil : Store your doll unclothed to avoid stains or fading caused by fabric dyes.

Avoiding Excessive Pressure or Weight on the Doll

Handling your doll with care can prevent many common issues. Excessive pressure or weight can lead to tears, permanent marks, or even structural damage. Here are some things to keep in mind:

Avoid extreme poses that the doll’s joints can’t support.
Don’t stretch the doll’s limbs or skin beyond their natural range.
Be gentle when moving or lifting the doll to prevent unnecessary strain.

If you’re wondering how to install and care for your tpe doll, remember that gentle handling is key. Treating your doll with care not only prevents damage but also extends its lifespan.

Remarque : Always check the doll’s position during storage or use to ensure no part of it is under excessive pressure.

Regular Inspections for Early Damage Detection

Regular inspections are a simple yet effective way to catch problems before they get worse. By checking your doll frequently, you can spot minor issues like loose joints, small tears, or discoloration early on. Addressing these problems right away can save you from costly repairs later.

Here’s how to perform a quick inspection:

Look for any visible signs of wear and tear, such as cracks or abrasions.
Test the joints to ensure they’re stable and functioning properly.
Check for stains or discoloration, especially in areas that come into contact with clothing.

Conseil : Make inspections a part of your routine. A quick check every few weeks can make a big difference in maintaining your doll’s condition.

By following these preventive measures, you’ll keep your doll looking and feeling like new. A little effort goes a long way in preserving its beauty and functionality.

Using Protective Covers and Clothing

Protective covers and clothing are game-changers when it comes to keeping your sex doll in top condition. They act as a barrier, preventing stains from darker fabrics that can transfer onto the doll’s skin. This is especially important for TPE dolls, which are more prone to staining. By using protective underclothing, you can dress and undress your doll more easily without worrying about accidental damage. These covers also help preserve the doll’s skin texture, keeping it smooth and free from wear over time. Think of them as an extra layer of care that ensures your doll stays looking its best for years to come.

Conseil : Choose light-colored or white protective clothing to minimize the risk of dye transfer. It’s a simple step that makes a big difference in maintaining your doll’s appearance.

Best Practices for Long-Term Care and Maintenance

Taking care of your doll doesn’t have to be complicated. By following a few best practices, you can extend its lifespan and keep it looking as good as new. Here’s what you should do:

Clean your doll regularly. Use gentle cleaning products to avoid damaging the skin. Focus on areas like the vagina and feet to prevent bacteria buildup.
Dry thoroughly after cleaning. Pat the doll dry with a soft cloth and let it air dry completely. Then, apply baby powder to maintain the skin’s smooth texture.
Store the doll properly. Keep it in a cool, dry place away from direct sunlight. For short-term storage, lay it on a foam pad. For long-term storage, hang it to prevent deformation.
Inspect frequently. Check for any signs of wear, such as small tears or discoloration, and address them promptly.

Proper maintenance isn’t just about keeping your doll clean. It also helps preserve its appearance, comfort, and value. Regular cleaning prevents bacteria and mold, while careful storage avoids discoloration and damage. By sticking to these habits, you’ll ensure your doll stays in excellent condition for years.

Remarque : Good maintenance isn’t just about looks—it’s also about hygiene. A well-cared-for doll is safer and more enjoyable to use.

Quand demander l'aide d'un professionnel

Sometimes, fixing your sex doll on your own just isn’t enough. While DIY repairs can handle minor issues, there are situations where professional help becomes the safer and more effective choice. Let’s explore when it’s time to call in the experts.

Signs That DIY Repairs May Not Be Enough

You might feel confident tackling small repairs, but some problems require more expertise. Here are a few signs that DIY repairs may not cut it:

Electrical components, like heating systems, need fixing. Attempting this yourself could lead to risques pour la sécurité.
Plumbing issues, such as leaks in dolls with built-in cleaning systems, can cause water damage or mold if handled incorrectly.
Structural damage, like broken skeletons or joints, might compromise the doll’s stability and require specialized tools.
Deep tears or holes that you can’t seal properly may worsen over time.
Repairs that don’t match the doll’s original appearance can detract from its value and aesthetics.
If you’ve already tried fixing the issue but it persists, it’s time to seek professional help.

Conseil : If you’re unsure about the repair process or lack the right tools, don’t risk further damage. A professional can save you time and money in the long run.

Finding Reliable Repair Services for Sex Dolls

Finding a trustworthy repair service can feel overwhelming, but a few steps can make the process easier:

Contact the Manufacturer: Start by reaching out to your doll’s manufacturer. They often provide repair kits or recommend certified services that specialize in your doll’s material and design.
Check for High-Quality Materials: Ensure the repair service uses adhesives and materials compatible with your doll’s composition. This guarantees a seamless finish and long-lasting results.
Look for Patience and Precision: A reliable service will take the time to carefully assess and repair your doll without rushing the process. This attention to detail ensures the best outcome.

Remarque : Always read reviews and ask for examples of previous work before choosing a repair service. This helps you avoid scams and ensures your doll is in good hands.

Costs and Expectations for Professional Repairs

Professional repairs can vary in cost depending on the severity of the damage and the type of doll. Minor fixes, like reattaching eyelashes or sealing small tears, are usually affordable. However, more complex repairs, such as replacing skeleton parts or fixing deep structural damage, can get pricey.

Here’s what you can expect:

Minor Repairs: These typically range from $50 to $150.
Moderate Repairs: Fixes like sealing large tears or addressing discoloration may cost between $200 and $400.
Major Repairs: Replacing joints or skeleton components can exceed $500, especially if custom parts are needed.

While professional repairs might seem expensive, they often save you from the frustration of repeated DIY attempts. Plus, they ensure your doll looks and functions like new.

Conseil : Always ask for a detailed quote before committing to a repair service. This helps you understand the costs and avoid surprises.

By recognizing when to seek professional help, you can keep your doll in top condition without unnecessary stress. Whether it’s a minor fix or a major overhaul, trusting an expert ensures the best results.

Taking care of your sex doll doesn’t have to be overwhelming. By identifying issues early and using the right tools, you can handle most repairs with ease. Regular maintenance, like cleaning the surface with mild soap and water, drying it thoroughly, and applying baby powder, keeps the skin smooth and prevents damage. Don’t forget to inspect your doll regularly for any signs of wear or tear.

Preventive measures go a long way in avoiding future problems. Store your doll in a cool, dry place, away from sunlight, and avoid bending its limbs unnaturally. Handle it gently to reduce stress on joints and seams. For hair care, use gentle shampoo and conditioner, and steer clear of high heat sources.

Conseil : Establish a cleaning routine every 2-4 weeks based on usage. This keeps your doll hygienic and in excellent condition.

With proper care and attention, your doll can stay in great shape for years. Whether you need to repair a sex doll or simply maintain it, these steps ensure it remains a valuable and enjoyable companion.

FAQ

What’s the best way to clean my sex doll?

Use warm water and mild soap. Gently clean the surface with a soft cloth or sponge. Avoid submerging the head or neck. Pat the doll dry with a microfiber cloth and let it air dry completely before applying baby powder to keep the skin smooth.

How often should I inspect my doll for damage?

Check your doll every few weeks. Look for small tears, discoloration, or loose joints. Regular inspections help you catch problems early, saving you time and effort on repairs. It’s a simple habit that keeps your doll in great shape.

Can I repair a sex doll myself?

Yes, you can fix minor issues like small tears or loose parts with the right tools. For TPE dolls, use TPE glue or a heat gun. Silicone dolls require silicone adhesive. For severe damage, consider professional repair services for the best results.

How do I prevent stains on my doll?

Avoid dressing your doll in dark or dyed fabrics. Wash new clothes before use to remove excess dye. Use light-colored or white protective clothing. If stains occur, treat them immediately with a stain remover designed for your doll’s material.

What should I do if my doll’s joints become loose?

Inspect the joint to see if a screw or weld is the issue. Tighten screws carefully or use a welding kit for metal frames. If the problem persists or seems too complex, seek professional help to avoid further damage.

Is it safe to use regular glue for repairs?

No, regular glue can damage your doll’s material. Use adhesives specifically designed for TPE or silicone. These products ensure a strong bond without harming the surface. Always test the adhesive on a hidden area first.

How do I store my doll to avoid damage?

Store your doll in a cool, dry place away from sunlight. Lay it flat on a foam pad or hang it using a compatible hanger. Avoid extreme poses or pressure points to prevent deformation or joint stiffness.

When should I seek professional repair services?

If your doll has severe damage, like broken skeleton parts or deep tears, it’s best to consult a professional. They have the tools and expertise to handle complex repairs, ensuring your doll looks and functions like new.

Voir aussi

Le processus de fabrication d'une poupée sexuelle

Les origines des poupées sexuelles et leurs inventeurs

Understanding Silicone Sex Dolls and Their Unique Traits

Est-il possible d'acheter des têtes pour des poupées sans tête ?